MESSAGE
If you have any questions, please contact us and we will contact you as soon as possible.
‹
›
‹
›
ADM-FR30 Anti-Mold Agent for Leather, Textiles & Coatings
ADM-FR30 is a broad-spectrum anti-mold agent for leather, textile fibers, bamboo and wood products, coatings, and paper. It is low in toxicity, free of phenols and harmful solvents, effective across pH 4–8, and designed to meet EU and US import requirements.
ADM-Ag05 Silver Ion Antimicrobial Agent
ADM-Ag05 is a silver ion antimicrobial agent for hand sanitizers, personal care products, and antibacterial sprays. It provides stable, long-lasting antimicrobial efficacy and odor control, is non-irritating to skin, and is non-toxic.
ADM-P3 Leather Anti-Mold Agent
ADM-P3 is a broad-spectrum leather anti-mold agent based on TCMTB. It protects wet blue and finished leather from fungal attack and microbial damage during processing and storage. Low toxicity, phenol-free, and compliant with EU and US import requirements.
ADM-H Anti-Mold Desiccant Pack
ADM-H is an eco-friendly anti-mold desiccant pack with high absorption capacity (up to 300% of its weight) and built-in antimicrobial protection. It is made from natural plant fibers, 100% biodegradable, and suitable for textiles, electronics, food packaging, and other applications requiring moisture and mold protection.
ADM217-10EVA Anti-Mold Masterbatch for Plastics
ADM217-10EVA is a new-generation eco-friendly anti-mold masterbatch for plastics. It provides excellent anti-mold stability and durability, is heat resistant up to 260°C, does not yellow or affect transparency, and complies with EU regulations.
ADM-455MF Industrial Anti-Mold Agent for Building Materials
ADM-455MF is a safe, high-efficiency, broad-spectrum industrial anti-mold agent for alkaline putties, alkaline coatings, and cement mortars. It provides strong mold inhibition without inducing resistance, is non-volatile, heat resistant, and cost-effective.
ADM-PSZ Silicone Anti-Mold & Antibacterial Paste
ADM-PSZ is a non-leaching anti-mold and antibacterial paste specifically designed for silicone rubber products. It provides durable protection against mold, bacteria, and fungi, is heat resistant up to 280°C, and does not yellow or affect color.
ADM-60F Antimicrobial and Anti-Mold Agent
ADM-60F is a broad-spectrum antimicrobial and anti-mold powder for coatings, latex, adhesives, rubber, plastics, and foam materials. It offers high safety, excellent heat resistance up to 240°C, and long-lasting protection at low dosage.
Product Information
ADM-ZPS Antimicrobial and Anti-Mold Agent
ADM-ZPS is a water-based antimicrobial and anti-mold agent designed for plastics, latex, artificial leather, coatings, and textiles. It helps prevent material degradation, discoloration, and surface growth caused by bacteria, mold, yeast, and algae. The product is free of arsenic and tin, contains no organic solvents or VOCs, and offers durable, wash-resistant protection. It also helps prevent odors caused by microbial growth, keeping treated materials fresh and hygienic.
Product Specifications
Suitable Applications
ADM-ZPS can be used for the protection of latex, polyurethane, acrylic resins, textiles, and many other materials. Typical applications include:
- Mattresses
- Carpets
- Textile wall coverings
- Interior decorative fabrics
- Indoor and outdoor furniture
- Tents and sleeping bags
- Backpacks
- Shower curtains
- Tarpaulins and awnings
- Umbrellas and sails
- Straps and ropes
- Shoe linings
- Various coated fabrics
Key Performance Benefits
- Broad-spectrum activity against Gram-positive and Gram-negative bacteria, mold, yeast, and algae.
- Helps prevent odors caused by microbial growth, keeping textiles and finished products fresh and hygienic.
- Free of arsenic and tin; water-based, no organic solvents, no VOCs, no unpleasant odor.
- No bioaccumulation; does not cause persistent environmental pollution.
- Compatible with most textile and coating auxiliaries (e.g., fluorocarbons, adhesives, softeners).
- Heat resistant up to 220°C.
- Skin-safe under normal use conditions.
Recommended Addition Level
Addition levels are based on the total weight of the final product or the dry weight of the fabric, depending on the application.
Processing Guidelines
- Working solution preparation: Add water first, then add wetting agent under stirring, followed by other chemicals such as adhesives (e.g., PBA). Finally, add the undiluted ADM-ZPS slowly under stirring and mix until the entire working solution is uniform. Prepared solutions should be used the same day.
- Dyeing process: Can be added in the same bath as the dye. Add ADM-ZPS last before the dyeing process, then proceed with heating, dyeing, reduction clearing, dehydration, drying, and setting.
- Padding process: Prepare the padding concentration according to the actual wet pick-up. The working solution performs best under slightly acidic conditions. Curing temperature: 145–180°C for 90–45 seconds.
- Coating process: Can be mixed with coating adhesives and applied by knife coating. Pre-test the effect on viscosity. Concentration should be determined based on the dry weight of the coated fabric.
- Spraying process: Dilute before spraying and ensure sufficient penetration. Test the dispersion on the customer's equipment to confirm suitability. Avoid contamination from room sprays and comply with local health regulations.
The required concentration depends on several factors, including the sensitivity of the system to microbial degradation, the extent of microbial invasion, the type of microorganisms, pH, temperature, humidity, and the required protection period.
Storage & Packaging
- Shelf life: 24 months in original packaging.
- Storage: Store at room temperature, protected from light, sealed, and moisture-proof. Do not expose to freezing. Temperature should not exceed 50°C.
- Note: Long-term storage may cause slight separation. Stir to restore the original state.
- Packaging: 25 kg/drum.
Frequently Asked Questions
What types of microorganisms does ADM-ZPS protect against?
ADM-ZPS is effective against a broad spectrum of microorganisms, including Gram-positive and Gram-negative bacteria, mold, yeast, and algae. It helps prevent material degradation, discoloration, and the development of unpleasant odors.
Is ADM-ZPS safe for skin contact?
The concentrated commercial product may irritate eyes and skin, so proper protective equipment should be used during handling. Treated finished products show excellent skin tolerance, and the active ingredient is also suitable for cosmetic applications.
How should ADM-ZPS be added to textiles?
ADM-ZPS can be applied by dyeing, padding, coating, or spraying. For padding, the working solution should be slightly acidic and cured at 145–180°C for 90–45 seconds. For dyeing, it can be added in the same bath, preferably last before the dyeing process.
What is the recommended addition level?
For polyurethane, latex, and coatings, the recommended level is 0.3–1.0% based on total weight. For textiles, it is 0.60–1.50% based on dry fabric weight. Actual dosage should be confirmed through small-scale testing.
How should ADM-ZPS be stored?
Store in original packaging at room temperature, protected from light, sealed, and moisture-proof. Do not freeze. Shelf life is 24 months. Slight separation may occur over time; stir before use.
Contact us to request a sample for testing and evaluation.
For more information, please contact our technical support team.
Thank you very much for writing to us. Please leave your message and contact information, we will reply to you within 24 hours.